Sanyo TLS-9072 NORMAL PLAYBACK

NORMAL PLAYBACK

Normal Playback

1Turn on the power to the VCR and TV monitor.

2Load the video cassette tape.

3Press the REC/PLAY SPEED l (or j) button to

select the playback speed mode.

ø

The selected playback speed mode is displayed

on the digital display.

NOTE:

XA slow motion effect or accelerated playback effect

can be achieved by using a slower or faster

playback speed than the speed used for recording.

4Press the PLAY button.

ø

Playback starts.

ø

If necessary, adjust the tracking to eliminate the

noise from the picture.

ø

If the image is unstable (rolling vertically), adjust

the vertical lock control to correct.

5To stop playback, press the STOP button.

ø

To advance or rewind the tape, press the

FF

or

REW

button.

NOTES:

XIf a tape recorded in SP mode on a standard VCR is

loaded, playback will be done in 2-hour mode.

XA tape recorded on a time lapse VCR produced by

another manufacturer may not play back with the same

degree of clarity on this unit.

Tracking Control

If there is noise in the image during playback,

1While looking at the playback picture, press and hold

the TRACKING/V. STILL+ button to minimize the

noise.

2If it cannot be minimized, press the TRACKING/V.

STILL– button.

Vertical Lock Control

During still image mode,

1Press and hold the TRACKING/V. STILL+ button to

reduce the vertical rolling of the image.

2If it cannot be corrected, press the TRACKING/V.

STILL– button.

Sharpness Control

Turn the SHARPNESS control clockwise or

counterclockwise for the desired sharpness of the image.

Audio Playback

XAudio playback is only possible in 2-hour, 12-hour and

24-hour modes.

XThe playback speed has to be the same as the

recording speed, for normal playback of the audio.

XFor a tape recorded in 12-hour and 24-hour recording

modes, to playback the audio, press the

SEARCH/AUDIO ON button after pressing the PLAY

button. “?” will be displayed to the left of the playback

speed on the digital display.

NOTE:

XNoise will appear in the image when audio playback is

used in 12- or 24-hour modes.

RC4Q/NA2 (TLS-9072 GB) Thu. Sept., 07/2000

28 English

Contents

Main PRECAUTIONS CAUTION CAUTION: For the customers in Canada Location FEATURES ACCESSORY 2 CONTENTS LOCA TIONS OF CONTROLS AND INDICATORS LOCATIONS OF CONTROLS AND INDICATORS Digital Display 4 6789F 1 Operation Indicators Page CONNECTIONS NOTE: 6 2 Power Cord Installation ON-SCREEN MENUS 1 The (SET UP 1) menu appears. Press the button to save any setting made and switch menu screens. ON-SCREEN MENUS 8 SETTING THE LANGUA GE AND CLOCK Language Setting 1 2 3 4 Clock setting CHANGING THE ON-SCREEN DISPLA Y Selecting the On-screen Display 10 1 2 3 VIDEO CASSETTE T APES Handling Cassette Tapes To Protect your Recordings Precautions concerning the video cassette tapes Loading VIDEO CASSETTE TAPES Correct tape thread check function 12 2 Setting the Action to Take When a Cassette is Loaded TAPE MANAGEMENT FUNCTION Operation If no tape management data is present on the tape If tape management data is present on the tape IMPORTANT NOTES: TAPE MANAGEMENT FUNCTION Setting the Tape Management Function 14 1 2 TAPE MANAGEMENT FUNCTION Tape Management Conflict Display PROTECT DAY CONFLICT REC PASS SET CONFLICT GROUP NO. CONFLICT NORMAL RECORDING Normal Recording Before starting 16 The Pause/Still indicator The record indicator NORMAL RECORDING Concerning the Number of Times Tapes can be Rerecorded on Changes to the Recording Speed Mode During Recording 2 Action to Take when the Video Signal Deteriorates NORMAL RECORDING Recording Check 18 1 Clog Detection AUTOREPEAT RECORDING Autorepeat Recording 1 The REPEAT indicator will light. 2 ALARM RECORDING Alarm Recording Setting 20 1 2 ALARM RECORDING Alarm Recording Counter Display Connections to the ALARM IN/OUT Terminals Checking the Alarm Recordings Time 1 ALARM RECORDING Alarm Scan 22 1 2 PROGRAM TIMER RECORDING Example 1: The timer recording indicator to Repeat steps 24 2 3 The day of the week of the 8th line is flashing. The recording start hour position starts flashing. 4 Setting the Holidays Changing a Program Timer Recording To Cancel a Program Timer Recording To Cancel all Program Timer Recordings PROGRAM TIMER RECORDING 26 RECORDING USING AN EXTERNAL TIMER INPUT Example 3: 2 3 4 NORMAL PLAYBACK Normal Playback 28 1 2 3 The selected playback speed mode is displayed on the digital display. SPECIAL PLAYBACK Picture Search (Forward and Reverse) 1 The image can be seen while the tape is advanced (or rewound) at high speed. Still Image DAY/TIME SEARCH Day/Time Search 30 Playback will start. 1 TAPE COUNTER 1 2 3 SETTING THE SECURITY LOCK SETTING THE BUZZER 1 32 2 3 OUTPUT TERMINALS TAPE END OUT Terminal 2 3 SW OUT Terminal OUTPUT TERMINALS REMOTE Jack 34 Remote control setting 1 MAINTENANCE Daily Inspection Inspection Procedure 1 2 MAINTENANCE Maintaining and Checking The Mechanism 36 Maintenance Table NOTES: TROUBLESHOOTING GUIDE After a Power Failure System Down 1 2 3 SPECIFICATIONS General Specifications 38 NOTE: Video SANYO INDUSTRIAL VCR WARRANTY OBLIGATIONS CUSTOMER INFORMATION 1-800-421-5013 Weekdays 8:30 AM 5:00 PM Pacific Time PARTS ORDER INFORMATION 1-800-726-9662 Weekdays 8:30 AM 5:00 PM Pacific Time EXCLUSIONS