DAY/TIME SEARCH

Day/Time Search

1Press the SEARCH button three times during stop
mode.
ø
“T/D SEARCH 01 00:00” will be displayed on
screen.
1H22M33S
T/D@SEARCH
01@@00:00
DAY@TIME
2Press the REC/PLAY SPEED l (or j) button to set
the desired day, then press the * button.
3Press the REC/PLAY SPEED l (or j) button to set
the desired hour, then press the * button.
4Press the REC/PLAY SPEED l (or j) button to set
the desired minutes.
NOTES:
XThe setting can be made in 10 minutes increments
only.
XFor recordings made on other VCRs, the exact
time may not be found even if the minutes are
entered. For tapes recorded on older models of
VCRs produced by this company (the ones without
a minutes setting for the day/time search function),
make sure to set the minutes to “00”.
5Press the FF (or REW) button.
ø
The desired day/time is searched and a still
image of the recording will appear on-screen.
6Press the PLAY button.
ø
Playback will start.
NOTES:
XIf during a search the end of the tape is reached, the
tape will rewind and stop. If the beginning of the tape is
reached, it will stop.
XThe alarm and day/time data are recorded on the tape
in a similar format. If they overlap, the alarm data will
have the priority. Therefore, when searching for a
day/time when an alarm recording was done, the
day/time search will not stop at the desired location. In
such a case, use alarm scan to find the desired
recording location.
XThe day/time search function may not operate correctly
if searching for a timer recording time.
XIf a recording on a tape extends for over a one month
period, the same day may be present twice on the
tape. If such a day is searched, since there is no month
search setting, the desired day may not be found.
RC4Q/NA2 (TLS-9072 GB) Thu. Sept., 07/2000
30 English