Care and Cleaning (continued)
How to remove the filter | Ceiling mounted type: | |
| 1. | Remove the bolt screws on the latch using a screwdriver. (After |
|
| cleaning, be sure to reattach the two bolt screws.) |
| 2. | Take hold of two latches on the air intake grille and press it to the rear, |
|
| and the grille will open downward. |
| 3. | Take hold of the |
|
| toward you to release it from the catch. |
Latch Catch
Air filter
Air intake grille
Air filter
How to remove the filter Wall type
1.Move the flap on the air outlet grille to its lowest position.
2.Hold the air filter by the tab at the bottom, and pull downward.
Air filter
Pull down
How to clean the filter
Outdoor Unit
CAUTION
Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter, wash the filter in lukewarm, soapy water, rinse it in clean water, and dry it.
1.Certain metal edges and the condenser fins are sharp and may cause injury if handled improperly; special care should be taken when you clean these parts.
2.Periodically check the outdoor unit to see if the air outlet or air intake is clogged with dirt or soot.
3.The internal coil and other components of the outdoor unit must also be cleaned periodically. Consult your dealer or service center.
Care: After a Prolonged Idle Period
Care: Before a Prolonged Idle Period
Check the indoor and outdoor unit air intakes and outlets for blockage; if there is a blockage, remove it.
·Operate the fan for half a day to dry out the inside.
·Disconnect the power supply and also turn off the breaker.
·Clean the air filter and replace it in its original position.
·Outdoor unit internal components must be checked and cleaned periodically. Contact your local dealer for this service.
22 |