Unit Display and Operation Selector (continued)
INDOOR UNIT
REMOTE CONTROL receiver
OPERATION lamp
TIMER lamp
Operation selector
REMOTE CONTROL This section picks up infrared signals from the remote control unit
receiver (transmitter).
Operation selector
ON position This position is for operating the air conditioner with the wireless remote control unit.
Set the selector normally in this position.
OFF position Switch the selector to the OFF position if you are not going to use the air conditioner for a few days or longer.
The OFF position does not disconnect the power. Use the main power switch to turn off power completely.
TEST position This position is used only when servicing the air conditioner.
CAUTION | Do not set at the TEST position for normal operation. |
|
OPERATION lamp This lights when the system is in the continuous COOL or FAN mode.
TIMER lamp This lamp lights when the system is being controlled by the timer.
7 |