1. Operation
NOTE
Operation with the Remote
Control Unit
AIR CONDITIONER
1HR.
F
1
AM
A
1HR.
TIMER 
TEMP. 
STEP 3
ON I /OFF
STEP 2
| OFF ON | NIGHT | |
MODE | SETBACK | ||
CLOCK | |||
STEP 1 |
|
| |
FLAP | HH | TIMER | |
STEP 5 |
| SELECT | |
FAN SPEED | MM | ||
STEP 4 | TIME SET | ACL A/C | |
SELECT | |||
SENSOR | |||
| BATTERIES |
|
Check that the circuit breaker on the power panel is turned on and that the operation selector of the indoor unit is in the ON position.
Press the setting buttons as described below and change the settings as desired.
| STEP 1 | Set the MODE selector button to COOL. | |||
|
|
| For cooling operation | → |
|
|
|
|
| ||
| STEP 2 | To start the air conditioner, press the ON/OFF operation | |||
|
|
| button. |
|
|
|
|
|
| ||
| STEP 3 | Press the TEMP. setting buttons to change the | |||
|
|
| temperature setting to the desired temperature. | ||
|
|
| Adjustable temperature range: | 88 °F max. | |
|
|
|
|
| |
|
|
|
|
| 60 °F min. |
|
|
|
| ||
| STEP 4 | Set the FAN SPEED selector button to the setting you | |||
|
|
| want. |
|
|
|
|
| If the fan speed is set | to | (Automatic), the fan |
| NOTE |
| |||
|
| speed switches automatically, according to the | |||
|
|
| |||
|
|
| |||
|
|
| difference between the actual room temperature and | ||
|
|
| the temperature setting. |
|
|
|
|
|
| ||
| STEP 5 | Press the FLAP button and set the airflow direction as | |||
|
|
| desired. |
|
|
|
|
| (Refer to ``Adjusting the Airflow Direction'' on page 20.) | ||
|
|
|
|
|
|
To stop the air conditioner, press the ON/OFF operation button again.
13 |
