How to use the Remote Control
The supplied Remote Control is capable of directly con- trolling the functions of contemporary McIntosh Source Components connected to the MA6600 via the Data Ports.
Input Source Selection
Press the appropriate Source Push-button to select the desired program source.
Mute
Press the MUTE Push-button to mute the audio in all outputs except the REC OUTPUT. The MUTE LED above the push-button will flash on and off to indicate that Mute is active. To un-mute the audio, press the MUTE Push-but- ton again. The mute push-button is also used to activate the special Headphone Mute Mode, refer to page 19 for additional information.
Mono
Press the MONO Push-button to switch from Stereo to Mono for Monophonic listening.
Disc, Server and Tape Functions
Use these push-buttons to operate a DVD Player, CD Player, CD Changer, Music Server or Tape Recorder.
Numbered Push-buttons
Press Push-buttons 0 through 9 to access tuner station pre- sets, tracks on discs or selections on a Music Server.
Disc and Track
Use the DISC and TRACK Push-buttons when a Disc Player or Music Server is being used.
Tuner Push-buttons
Press the AM or FM Push-button to select the desired broadcast band. Press and release the Channel Up or Down Push-button to seek the next available station.
Press and hold a Channel Up or Down Push-button to seek continuously from station to station.
Note: When an external McIntosh Tuner is connected to the MA6600, press +10 Push-button to start the automatic brief audition of each of the presets stored in the tuner memory. Press +10 Push-button a second time to stop on a station preset and exit the review process.
Volume
Press the Up or Down VOLUME Push-button to raise or lower the listening volume level.
Note: The Record Signals present at REC OUTPUTS are not affected by volume changes.
Pause
Press the Pause
Pushbutton to perform various functions on a variety of McIntosh Components. It will also pause the playing of a disc or tape player.
Trim
Press the TRIM Push-button until the desire Trim func- tion (Bass, Balance, Trim Level, Treble, etc.) appears on the Front Panel Information display, then press the LEVEL Up or Down Push-button to adjust the Trim setting.
Press and release the LEVEL Up or Down Push- button to recall the last Trim Function Selected and its current setting, additional pressing of the push-buttons will allow adjustment of the Trim Setting.
Note: For additional information on the Trim Functions refer to pages 16, 17 and 18.
Acc On/Off
Press ACC ON to turn the power ON or ACC OFF switch- es AC Power ON or OFF to certain McIntosh Components when connected via the Data Port and any McIntosh Com- ponents connected to the ACC Power Control Jack.
Amplifier Selection
Press the 2nd Push-button followed by the OUTPUT 1 or 2 Push-buttons either separately or together, to control the rear panel OUTPUTS 1, 2 which can feed signals to a Power Amplifier or other accessory component.
