McIntosh MA6600 owner manual Meter indicates the

Front Panel Displays, Controls, Push-buttons and Jack

Meter indicates the	LED indicates when the	LED indicates when the	Meter indicates the
Left Channel Out-	Left Channel Amplifier	Right Channel Amplifier	Right Channel Out-
put of the amplifier	POWER GUARD circuit	POWER GUARD circuit	put of the amplifier
	activates	activates

INPUT Control al-	TRIM SELECT	INFORMATION	TRIM ADJUST/
lows the selection of	allows selection	DISPLAY indi-	TUNE allows
various sources for	of various types	cates the Sources,	adjustment of vari-
listening and record-	of audio settings.	Volume, other	ous types of audio
ing	It is also used in	Audio Settings,	settings and tune
	the setup mode for	Operational Func-	in radio stations.
	various functions	tions and Setup	It is also used in
		Mode Settings	the setup mode for
			various functions

SOURCE: CD1 15%

VOLUME Control allows adjustment of the listening level for both channels

Connection for low impedance dynamic headphones, for private listening

STORE/EXIT Push-button with indicator, used to store various selections and set- tings into memory and is used to exit the Setup Mode

Tone BYPASS Push- button with indicator, when activated the audio signal bypasses the Tone Controls

OUTPUT 1 and 2 Push-buttons with indicators, turn the Loudspeakers and Preamplifier Output 2 On or Off

IR Sensor receives commands from a Remote Control

12

MONO/SETUP Push-button with indicator, combines the Left and Right Channel signals for Monophonic Sound, used to enter the Setup Mode and step through the Setup Menu

MUTE Push-button mutes the audio from the Loudspeakers and Headphones

STANDBY/ON Push-button with indicator switches the MA6600 ON or OFF (Standby) and resets the micropro- cessors