How to Operate the MA6600, con’t
After approxi- |
|
| |
TONE CONTROL | |||
mately 3 seconds | |||
CD1 | : BYPASS | ||
the Information | |||
|
| ||
Display returns |
| Figure 30 | |
to indicate the |
|
|
Source Selection and Volume Level.
TRIM LEVEL
The Trim Level adjustments allow for making fine adjust- ments to the previously performed Trim Level Adjustments (refer to the Setup Section of this Owner’s Manual on page 13). To make fine adjustment to the currently selected Input Source perform the following:
1. Rotate the TRIM SELECT Control or press the TRIM
play. Refer to |
|
|
| |
TRIM LEVEL: 0.0 dB | ||||
figure 31. | ||||
2. Rotate the | Min | Max | ||
TRIM AD- |
|
|
| |
| Figure 31 |
| ||
JUST Control |
|
|
| |
TRIM LEVEL: | ||||
or press the | ||||
LEVEL + / - | Min | ¦¦¦¦¦¦¦ | Max | |
|
|
| ||
| Figure 32 |
| ||
to adjust the |
|
|
| |
volume level | TRIM LEVEL: | 6.0 dB | ||
from | Min | ¦¦¦¦¦¦¦ Max | ||
(+) 6dB. Refer |
|
|
| |
| Figure 33 |
| ||
to figures 32 |
|
| ||
|
|
| ||
and 33. |
|
|
|
After approximately 3 seconds the Information Display returns to indicate the Source Selection and Volume Level.
METER ILLUMINATION
The MA6600 Front Panel Meter Illumination may be switched On or Off by performing the following:
1. Rotate the TRIM SELECT Control or press the TRIM
2. Rotate the |
|
| |
METER | |||
TRIM AD- | |||
JUST Control | LIGHTS: | ON | |
or press the |
|
| |
Figure 34 |
| ||
LEVEL + / |
|
| |
- | METER |
| |
tons to switch | LIGHTS: | OFF | |
On or Off the |
|
| |
Figure 35 |
| ||
Meter Illumi- |
| ||
|
|
nation. Refer to figure 35.
After approximately 3 seconds the Information Display returns to indicate the Source Selection and Volume Level.
Note: For information on how the Front Panel Information Display Brightness can change with the Meter Illumi- nation setting, refer to page 15 “Display Brigthness”.
Mono
Press the Front Panel MONO
SOURCE: CD1 15%
Figure 17
18