McIntosh MA6600 owner manual Input Source Settings, Re-TitleInputs, Meter Illumination On/Off

2.Press the MONO/SETUP Push-button until the Setup Mode is active. Then press the MONO/SETUP Push- button to select the Setup Menu item “SETUP: TRIM

____ 0.0”.

Refer to	SETUP: TRIM CD1		0.0
figure 4.
	Min		Max
3. Rotate the
TRIM/SE-		Figure 4
LECT Control until “TRIM CD1 _._” appears on the
Front Panel Information Display. If necessary, rotate
the TRIM ADJUST Control for CD1 with a setting of

“0.0”.

4. Rotate the TRIM SELECT Control until “TRIM SERVER _._” appears on the Front Panel Informa- tion Display.

5. Rotate the TRIM ADJUST Control until Listening

Volume Level of the SERVER Input is the same as the CD1 Vol-

ume Level.	SETUP:	TRIM SRVR	-2.5
The figure 5	Min	¦¦¦	Max
illustration
		Figure 5
indicates a

-2.5dB decrease in the SERVER Level.

Note: The trim LEVEL +/ - Push-buttons on the Remote Control may also be used.

6.Rotate the TRIM SELECT Control until the name of the next Input to be adjusted is displayed.

7.Repeat steps 5 and 6 until all the Inputs with sources connected to the MA6600 have the same relative vol- ume levels when switching between them. Record any changes made to the various inputs from the default settings in the “Input Source Settings” chart below.

8.Press the STORE/EXIT Push-button to exit the Setup Mode.

Input Source Settings

Input	Default	New	Trim	Trigger
No.	Name	Name

1PHONO

2 CD1

3 CD2

4 DVD

5 TV

6 SERVER

7 REC

― ― ―

Re-Title Inputs

The MA6600 provides the ability to change the default In- put Names to match the components in your system. In the following example the REC (Input 7) will be renamed and appear as SAT on the Front Panel Information Display.

Notes: 1. One of the high level Inputs may be renamed to AUX or swiched Off. If any input is switched Off its name will no longer appear on the Front Panel Informa- tion Display when using the INPUT Control, nor is it accessible with the Remote Control.

2. When a high level input is switched Off its name will become available to the remaining high level inputs.

3. The Phono Input is designed for connection of a turntable only and thus the title is not changeable. However, the Phono Input may be switched Off.

4. When the Phono Input (1) is switched off the name “Phono”may be used for another input, however an external phono preamp would be needed to go be- tween the turntable and the high level input “phono” on the MA6600.

1. Press the MONO/SETUP Push-button until the Setup Mode is active. Then press the MONO/SETUP Push- button to select the Setup Menu item “SETUP: INPUT

NAME”. Re-
	SETUP: INPUT NAME
fer to figure 6.
2. Rotate the	INPUT2 (CD1 ):CD1
TRIM/SE-
	Figure 6
LECT Con-
trol until “INPUT7 (REC ): REC” appears on the
Front Panel
Information	SETUP: INPUT NAME
Display. Refer	INPUT7 (REC ): REC
to figure 7.
	Figure 7
3. Rotate the
TRIM/TUNE Control until “INPUT7 (REC ): SAT”
appears on the
	SETUP: INPUT NAME
Front Panel
Information	INPUT7 (REC ): SAT
Display. Refer
	Figure 8
to figure 8.

4.Press the STORE/EXIT Push-button to exit the Setup Mode.

Meter Illumination On/Off

The Front Panel Meter Illumination may be switched On or Off. Follow the steps below to switch the Meter Illumina- tion Off.

1.Press the MONO/SETUP Push-button until the Setup Mode is active. Then press the MONO/SETUP Push- button to select the Setup Menu item “SETUP: ME- TER”.

14