McIntosh owner manual How to Operate the MA6600, Source Server

Models: MA6600

1 24
Download 24 pages 24.8 Kb
Page 16
Image 16
How to Operate the MA6600
Figure 15
SOURCE: CD1 15%

How to Operate the MA6600

Power On

The Red LED above the STANDBY/ON Push-button lights to indicate the MA6600 is in Standby mode. To Switch ON the MA6600, press the STANDBY/ON Push-button on the Front Panel or the Power Push-button on the Re- mote Control. The MA6600 will go through a brief startup initialization with the Front Panel Information Display indicating the last used source and volume setting, this is followed by the

volume setting indication starting at zero and then increasing to the

last used volume setting. Refer to figures 15, 17 and 18.

Note: For an explanation of the Remote Control Push-but- ton functions, refer to pages 10 and 11.

Source Selection

Rotate the INPUT Control to select the desired source or press the appropriate push-button switch on the Front Panel or Remote Control. Refer to figures 15, 16 and 17.

Volume Control

Rotate the Front Panel VOLUME Control or use the VOL-

UME Upor

SOURCE: SERVER

DownPush-

buttons on the

30%

Remote Control

Figure 16

for the desired

 

listening level. Refer to figures 15, 16 and 17.

Trim Functions

The MA6600 has six different Trim Selections with Adjustments. The Trim Selections include Bal- ance, Bass, Treble, Tone Bypass, Input Level Matching and Meter Illumination. The Trim Settings are stored in memory indepen- dently for each Input Source Selected, the only exception being Meter Illumination setting of On or Off, which is the same for all inputs.

BALANCE

 

Listening balance varies with

 

different program sources, room

 

acoustics and listening positions

 

relative to the Loudspeakers. Use

 

the Balance (Trim Function) as

 

needed to achieve approximately

 

equal listening volume levels in

 

each Loudspeaker. To adjust the

 

Balance perform the following:

 

1. Rotate the Front Panel TRIM

 

SELECT Control or press the

 

TRIM Push-button on the

 

Remote Control until “BAL-

 

ANCE 0 dB” appears on

 

the Front Panel Information

 

Display. Figure 19.

Figure 18

SOURCE: CD1 15%

Figure 17

16

Page 16
Image 16
McIntosh owner manual How to Operate the MA6600, Source Server