CONNECTIONS

(VCC-6592P only)

 

1

 

2A (A)

 

12 V DC

 

+ –

(Video signal connections)

12 V DC connection

: VIDEO IN

Push to insert the cable

: VIDEO OUT

 

Connections to the camera Y/C OUT connector

The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately.

1Using a coaxial cable (twin type, 75 ohms), connect the Y/C OUT connector from the camera to the S-VIDEO input terminal on the monitor or time lapse VCR.

2Use a commercially available 12 V DC adaptor.

Connect an DC 12 V power source to the 12 V DC input terminal on the back of the camera.

2A: When using this unit, the supplied clamping core (A or B) must be installed on the power cord and BNC cable, in order to prevent electromagnetic interference to the other devices connected.

(A)

2

2A (B)

3

12 V DC input

3The POWER indicator (A) will light. Adjust the picture on the monitor using the Brightness and Contrast controls.

CAUTION:

•Please use a monitor with a Y/C or S-VIDEO input terminal, or a time lapse VCR with a S-VIDEO input terminal.

•Use a Mini-DIN (round type, 4-pin) plug to connect to the Y/C connector.

Never use a coaxial cable longer that 10 metres to connect the camera to the S-VIDEO input terminal.

10 English