SETTINGS

Lens iris adjustment

If using a DC type auto-iris lens, you will need to set the LEVEL (VR301) volume when shooting in the conditions described below.

VR301

L (counterclockwise): To decrease the contrast

H (clockwise): To increase the contrast

•If shooting simultaneously in a dark room and through a bright window.

•If the subject background is extremely bright or dark.

•If the brightness of the picture on the monitor is not correct.

Line phase adjustment (VCC-6594P only)

When using a camera switcher to connect 2 cameras or more to one monitor, there may be a vertical roll of the images when switched. In such a case, set as described below.

1Set the switch 9 (SYNC) to the up (LL) position.

2Switch the display on the monitor from camera 1 to camera 2. Adjust the LINE PHASE volume on camera 2 until the vertical roll of the image stops.

If more than two cameras are used, please repeat this procedure for all the cameras.

9

CAUTION:

If the vertical roll cannot be corrected by setting the LINE PHASE volume on camera 2, try setting the LINE PHASE volume on camera

1.If it still cannot be corrected, please check that the polarity of the power cords of all connected devices is correct.

English 17