CONNECTIONS

(VCC-6594P only)

1

 

 

2A

 

AC 24 V

(Video signal connections)

~

~ GND

: VIDEO IN

 

 

: VIDEO OUT

Basic connection for monitoring or recording

The peripheral devices (VCR, monitor, lens, etc.), AC adaptor and cables are sold separately.

1Make the video signal connection between the camera and the monitor or time lapse VCR.

2Use a commercially available 24 V AC adaptor.

Connect an AC 24 V power source to the AC 24 V input terminal on the back of the camera.

2A: When using this unit, the supplied clamping core (A) must be installed on the power cord and BNC cable, in order to prevent electromagnetic interference to the other devices connected.

(A)3

AC 24 V connection

Push to insert the cable

2

2A

3Insert the plug of this power cord into a wall outlet. The POWER indicator (A) will light. Adjust the picture on the monitor using the Brightness and Contrast controls etc.

Coaxial cable type and maximum length

•Cable type RG-59U (3C-2V), 250 m maximum.

•Cable type RG-6U (5C-2V), 500 m maximum.

•Cable type RG-11U (7C-2V), 600 m maximum.

CAUTION:

•The RG-59U type cable should not be run through electrical conduits or through the air.

•Using CCTV/Video-grade coaxial cable.

English 11