INSTALLATION MANUAL

Color CCD Camera

THIS INSTALLATION SHOULD BE MADE BY A QUALIFIEDSERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL VCC-P9575PCODES.

Please read this manual before installing and using this unit, and always follow the instructions in it for proper use. Please also read the separate INSTRUCTION MANUAL before using the unit for proper use.

This unit can be installed on the ceiling or wall.

Ceiling Installed (see page 1)
(In-ceiling routing)(Surface routing)
Wall Installed (see page 3)
(In-wall routing)(Surface routing)
Important

•Be careful when opening holes for installing the unit. Work with the power and video cables pulled out for easy installation.

•Make sure to properly perform waterproofing for the ceiling or wall where you are installing the unit.

•Make sure that the surface in the installation location has no unevenness and is strong enough to bear the total weight of the unit.

•Install this unit in an environment where the temperature range stays between -10°C and +40°C (no condensation allowed).

•As a precaution against static electricity damage, touch a nearby metal object (door knob, etc.) to dissipate static electricity in your body before touching this unit.

bWhen routing the cables on ceiling or wall surfaces:

Twist off the knockout piece (B) above the rib mark (A) with a pair of pliers, etc. and pass the connection cables through the hole.

中文简体 Deutsch Français English

B

A

bAccessories

1Cover sheet

2Screw

3 Clamping

 

 

core x2

bReplacement timing of major parts

If the unit is used continuously, parts will become worn and deteriorated depending on the environment of use. It is recommended that parts be replaced approximately every 2 years (approximately 1,200,000 times) in order to maintain unit performance.

• Motor, cables used in mechanical parts, gears, etc.