Installing on the Ceiling
1.Remove the base plate from the camera unit
Pushing the base plate lock (A), open the base plate in the arrowed direction.
A
2. Install the base plate
1Pass the connection cables through the cable hole on the base plate.
2Position the arrow (2) on the base plate in the direction of the lens.
3Set the base plate on the ceiling and tighten it securely using suitable screws and washers (B).
•Length: 35 mm or more
•Diameter: 3.5 to 5.0 mm
•Height of screw head: 5 mm or less (washer included)
1
2
B
B
Make sure to tighten the screws properly. Using screws of sizes other than specified may cause the unit to fall.
3. Connect the cables from the ceiling
Push the excess of connected cables into the ceiling. For details on the connections, see page 5.
4.Mount the camera unit to the base plate
Aligning the ribs (C) and hook (D) on the camera unit with the slot on the base plate, push the camera unit until it clicks.
C
D
Make sure that the camera unit and base plate fit perfectly.
1