Sanyo VCC-WB2000P instruction manual PPP Dial-up Connections

Connections

PPP (Dial-up) Connections

If connecting the camera using PPP, you will need to install the Network Archiving software (sold separately). In addition, the data that is transmitted via PPP connections consists of alarm images and alarm information. In addition to the connection method shown below, you can also connect the camera to an ISDN terminal adapter and use the Network Archiving software. Refer to the documentation provided with the Network Archiving software for further details.

☞Use a serial cable to connect the RS-232C connector of the camera to a modem. Set pin 1 of the PC/MODEM select switch to the “MODEM” setting. You do not need to change the setting for pin 2.

Note: When using modem connections, you cannot access the camera using a computer’s web browser. You should normally connect the camera to a wired LAN or wireless LAN.

PC CARD Internet

MONITOR	ETHERNET		RS-232C
OUT
	COM	AC24V	GND

PC

POWER 1 2

MODEM	DC12V
ALARM IN OUT
	CLASS 2 WIRING

Serial cable

PC

1	2	Modem
MODEM

Set pin 1 to “MODEM”

English – 11 –