Alarm Setting

ID3

8PRIORITY setting

This sets the image quality for alarm recording.

PICTURE QUALITY

Alarm images are recorded at high quality.

TIME

Alarm images are recorded at normal quality.

*The time used for recording alarm images becomes interval shorter.

MOTION DETECTOR SET Settings

2

6

4 7

9ALARM RESOLUTION setting

This sets the resolution that is to be used for recording alarm images.

The default setting is “720x240”.

FOVERWRITE setting

If this is set to “ON” while a memory card is inserted, old alarm data is erased and new data is recorded over the top.

5

3

1 Click the [ALARM] button in the main menu.

The ALARM SET screen will be displayed.

2 Set MOTION DETECTOR to “ON”.

The MOTION DETECTOR SET screen will be displayed.

3

4

While looking at the screen, move the pointer to the motion sensor detection area and click with the left mouse button.

A sensor mark (ú) will appear in the detection area (grid).

Set other sensor marks in the detection area in the same way.

Note: If you click on a sensor mark that has been set, it will be cleared.

Click the [SET] button.

– 38 –

English

Page 39
Image 39
Sanyo VCC-WB2000P instruction manual Motion Detector SET Settings, Picture Quality, Time