Matrix Switcher

MPX-MX2005

Monitor

Monitor

Matrix

Digital Video

Switcher

Recorder

System Controller

 

High Density Scalable Matrix Switcher

SANYO's Matrix Switcher MX Series is a modular security system based on a microprocessor and supports up to 1,024 inputs and up to 96 outputs with a single matrix system. A large number of video inputs (10,000) and outputs (1,000) can be controlled from a single controller.

General

The modular design of the Matrix Switcher makes it easy to expand the system to a maximum of 16 cards.

Both 4U and 8U rack-mount housing is available for the switcher with a single 4U bay holding 112 video inputs and 16 outputs.

Modular Construction

The Matrix Switcher is easily expanded using slots for expansion modules. The housing holds up to 16 cards.

Multi-Protocol Support (SSP-Compatible)

The Matrix Switcher is controllable from SANYO VSP-9000 or any other SSP-compatible control device. By using the new Touch Panel Controller with user-friendly graphical user interface, the user can easily control and set up the Matrix Switcher. At the same time, the controller can be used to control other devices supporting SSP protocol, such as SANYO dome cameras, multiplexers, DVRs and VCRs. Integration of other devices can be also achieved by the use of an optional SSP receiver.

SSP Control System

Control

Use one of the following options to control the Matrix

Switcher.

1.VSP-9000 controller or any other SSP-compatible controller

2.Any PC on the same network as the matrix via a TCP/IP connection. The control software is included in the package.

3.Using the optional custom-made software with a graphical map interface. This software needs to be installed in a PC, from which control is performed through a TCP/IP connection.

Network Support and LAN

The Matrix Switcher can be controlled by using a TCP/IP connection, either

Camerafrom a touch panel controller or a PC and existing networks.

Timer Functions

It is possible to program over 100 camera and monitor tours individually.

Speed Dome Camera

Alarm Management

With an optional order, the system comes with an external alarm input for

each camera and an external alarm output for each monitor. Each alarm signal can be configured to call any camera to any monitor, to put a dome camera to any preset position, or to start tours or sequences.

MPX-MX2005

482(19.0)

378(14.9)

425(16.7)

370(14.6)

172(6.8)

 

[Unit: mm (inch)]

MODEL

MPX-MX2005

Video format

PAL / NTSC

Input signal / Input impedance

1.0 Vp-p/ 75Ω

Output signal / Output impedance

1.0 Vp-p/ 75Ω

Video input

64 (up to 1,024 [BNC])

Video output

16 (up to 96 [BNC])

Alarm input

16 (up to DI-1024)

Alarm output

8 (up to DO-512)

Communication

RS-232C, RS-485, USB, Ethernet

Communication speed

19,200bps

PTZ camera control

3 x RS-485

On screen display

Date. time, video number, video title, monitor status

Text insertion

Each up to 20 characters

Dimension

482 (W) x 378 (H) x 172 (D) mm [19.0(W) x 14.9(H) x 6.8(D) in.]

Power requirements / Frequency

100 V to 240 V AC ± 10%, 50 / 60 Hz

NOTE: Specifications subject to change without notice

DVRCamera · Lens Pan-focus Camera Network Camera Specialty Camera System Chart

MonitorSSP System

Compatibility (Pelco, Ernitec and AD)

Option

The Matrix Switcher also supports

 

 

Pan/Tilt/Zoom or dome cameras from different

 

manufacturers. This makes the switcher

 

highly compatible and allows the user to

 

integrate existing cameras into a new system.

 

Either a fixed camera or a Pan/Tilt/Zoom

 

camera may be connected to each video

 

input.

 

The RS-485 bus system supports up to 128

 

matrix units on a single bus. The number of

 

Matrix Switchers that can be controlled using

 

the TCP/IP protocol for LAN or WAN networks

 

is almost unlimited.

 

Extension Box

MPX-EX200

Extension Box with power

MPX-EX210

Video Distribution Box

MPX-EX300

8ch Main Board

VA-EX8MB

8ch Extension Board

VA-EX8EB

8ch Extension Board w/coaxial

VA-EX8CB

32ch Alarm Board

VA-EX8AB

Example System

56