SATO 400 manual Using the Printer, Printing a Self-Test Label

CX400 User Guide

Label Edge and

Eye-Mark Sensor

Ribbon Sensor

Using the Printer

Printing a Self-Test Label

Printing a self-test label checks the printer overall operability. To run a self-test, confirm that the printer is loaded and connected to AC power and no print jobs are in process. Then:

1.Turn off the power.

2.Press and hold the FEED button.

3.Turn on the power.

4.After the printer starts printing release the FEED button.

5.After the self-test label finishes printing, the printer will enter the hex dump mode. To return to normal operation you must cycle printer power.

Important!

The printer will be in hex dump mode after printing the self- test label. It cannot print normal labels in hex dump mode. The printer will return to normal operation only when you cycle printer power.

Page 12 PN 9001107 Rev. A