SATO 400 manual Parallel Input Cable Centronics 36 pin, Serial Port Parameters

CX400 User Guide

Parallel Input Cable (Centronics 36 pin)

Pin #	Description
1
	STROBE
2~9	Data bits 0-7
10
	ACK
11	Busy
12	PE (Paper End)
13	Select, always high
16	Signal Ground
17	Chassis Ground
18	+5V DC
19~30	Ground
32
	Fault

Serial Port Parameters

CX400 printers are configured as Data Terminal Equipment (DTE) equipment, and use Request-To-Send/Clear-To-Send (RTS/CTS) handshaking or X-On/X-Off flow control (control characters are DC2 and DC4). The serial port supports the following parameters:

Speed	9600,19200 or 38400 bps
Parity	Odd, Even or None
Data Bits	7 or 8 bits
Stop Bit(s)	1 or 2
Default Parameters	9600 bps, No parity, 8 data bits, 1
	stop bit

Page 22 PN 9001107 Rev. A