SATO LM400E manual Ｌｉｎｅ key

▲Operation Panel

Instructions and error messages are displayed in alphanumeric.

Display panel

Displays an error message and

instructions, etc.

ＬＩＮＥ key

Toggles the printer between on-line and off-line mode for print start/stop and for transmitting/receiving data.

ＦＥＥＤ key

Feeds the label.

Press once to feed one blank label.

*When turning the power ON, or when the label is not at the right position after setting the label, press the FEED key to adjust the label position.

DIP switch

Sets the operational parameters of printer

Adjustments

Can be used for adjustment when servicing.

Do not use this volume unless otherwise instructed. PRINT : Adjusting print darkness

OFFSET: Adjusting tear-off position

PITCH : Adjusting home position of the label

STATUS

Indicates the printer status.

Green: Enabled for print and data communication

Red: An error occurred.

Off: Disabled for print and data communication

8