SATO MB200 manual PN9001122, Non-separated Labels, Printing

Non-separated Labels

Use to print on labels without the adhesive.

Printing

(1)Follow directions on the Continuous mode from step 1 to 5 on page 23 and 24.

(2)Follow step 1 of the directions on the Dispense mode on page 25.

(3)Pick up the corner of the sheet and pull upward.

The label will cut along the perforated line.

*Number of sheets that can be printed on this function will differ from the Continuous / Dispense mode.

*Should the Non-separated label tear other than at the perforated lines, and the printing is improper, perform the procedures on page 44.

9

Reference

PN9001122 Page 43