4
Before Starting
(3) Place the label roll on the spindle on the open cover side.
*When inserting the label roll, make sure to press down the label core to prevent the labels from raveling out.
*When removing remaining labels, insert your finger in the label core and remove the label with the core to prevent the labels from raveling out.
(4)After removing the leading tape on the roll, take the leading edge of the first label of the roll and pull it out from the label ejection via the platen roller. Then, adjust the label guide (left) to the label size, and pass the label underneath the label guides.
Label guide (Left)
(5)Place your fingers on the open cover ribbed area and close the open cover.
Label set position
This completes the loading of labels when using the Continuous mode.
Page 24 | PN9001122 |
