Over 30mm
Dispense mode |
|
Labels | |
| label |
First perform steps 1 through 5 on pages 23 and 24 (Continuous mode)
(1)Pick the Dispense/Continuous switch lever from both sides, and
slide the Dispense unit to the direction of the arrow.
*Leave more than 30mm of the label out for the Dispense mode.
*Slide the Dispenser unit until it is set in place.
*Always set the Dispenser unit back to the Continuous mode when
opening/closing the cover.
At the Continuous mode
STD
| At the Dispense mode | ||
PN9001122 |
| DSP | Page 25 |
|
| ||
4
Before Starting
