Name and Function of Operating Parts
Interface connector (RS- 232C):
For connection to a computer.
Interface cover: Covers the interface connector.
Front cover:
Open to position labels.
Cover Open/Close lever: Opens and closes the front cover.
Cutter:
Cuts printed labels.
IrDA adjustment lever: Changes the angle of the IrDA receiving element.
IrDA filter:
The IrDA receiving element is located inside.
Dispenser unit:
Move this when using the Dispense mode.
Power switch:
Press to turn the power on and off.
Battery cover:
The battery pack is inserted here.
Belt hook:
Attaches the shoulder belt when hanging the printer on a belt.
*Do not hang the printer on to anything else but a belt.
Label guide:
Adjust this to the label size being used.
Label ejection:
The printed label comes out here.
Label width scale:
Scale for measuring the width of the label being used.
DC input jack:
For connection of the AC adapter.
DC input jack cap:
Covers the DC input jack. Feed key:
Press to feed labels
Print key:
Press to set the printer to online or
STATUS indicator (LED) Indicates the status of the printer. (Refer to page 29, 30,
38 and 39)
3
Part Names
PN9001122 | Page 17 |
