SATO XL4xxe manual Cutter Sensor Adjustment continued, previous home next, GND I-Mark Center-Hole

Cut sensor type	Sensor Level Voltage
	High level (Position a TAG in the	: More than (+) 6.0Volts to less than
	sensor’s field of view.)	(+) 7.0Volts
Center Hole
	Low level (Position a Center Hole	: Less than (+) 0.5Volts
	in the sensor’s field of view.)
	High level (Position a I-Mark in the	: More than (+) 6.0Volts to less than
	sensor’s field of view.)	(+) 7.0 volts
I-Mark
	Low level (Position a NON I-Mark	: Less than (+) 0.5Volts
	in the sensor’s field of view.)
	High level (Position a TAG in the	: More than (+) 6.0Volts to less than
	sensor’s field of view.)	(+) 7.0Volts
R-Corner
	Low level (Position a R-Corner in the	: Less than (+) 0.5Volts
	sensor’s field of view.)

EZ Manual: XL4xxe 9

Cutter Sensor Adjustment continued

GND

I-Mark

Center-Hole

previous home next

Barcode SATO International Pte Ltd