Changing Key Operator Settings
163
8
Note
Inform the Requesting Party of the
SUB Code assigned to the Transfer
Box. When they wish to have a mes-
sage transferred by your machine,
ask them to send the message using
SUB Code Transmission and speci-
fying this SUB Code. p.43 If a
password is also programmed, in-
form them of this too and ask them
to enter it for the SID Code. p.44
You can store in one box the follow-
ing items:
SUB (required)
Up to 20 characters long and can be
composed of digits 0-9, "#", "*" and
spaces (the first character cannot
be a space).
Box Name (required)
Up to 20 characters long.
Password (optional)
Up to 20 characters long and can be
composed of digits 0-9, "#", "*" and
spaces (the first character cannot
be a space).
Note
When a password is pro-
grammed, a mark is displayed
before the Box Name.
Receiving Station (required)
You can store 5 receiving stations
(destinations to which messages
will be forwarded) for each box.
Specify receiving stations with
Quick Dials or Groups assigned to
Quick Dials that have been pro-
grammed beforehand.
Limitation
After messages are transferred, a
Transfer Result Report is not sent
back to the sender.
Note
After messages are transferred,
they are deleted.
If messages cannot be sent by
Transfer Request, messages re-
ceived are printed.
The machine prints out received
messages that it transfers and the
Transfer Result Report after the
transfer has finished. If you want
to turn this feature off, please con-
tact your service representative.
When the programmed receiver is
a Multi-step Transfer Group Dial,
Multi-step Transfer takes place.
p.83 Multistep Transfer
You can edit boxes in the same
way you program them. However,
to change the SUB Code itself, you
must delete the box, and then pro-
gram a new SUB Code.
You can edit boxes in the same
way you program them.
A
AA
APress the {
{{
{User Tools/Counter}
}}
} key.
B
BB
BPress [Facsimile Features].
Facsimile Features menu is shown.
RusC2FaxADEN-F_V4_FM.book Page 163 Monday, August 20, 2001 10:52 AM