Getting Started

F Press the {User Tools} key.

1

A message “Parameter settings have been changed. You must restart the machine before the new settings take effect.” appears on the display panel.

G Turn off and on the main power switch of the machine.

The set items become valid.

Other Settings

The followings are other items you can set using the control panel besides the IP address and the Network boot:

Note

❒The settings are performed in Web Status Monitor or SmartDeviceMonitor for Admin. See the corresponding online Help for details.

Items

Factory Settings

 

 

Subnet mask

000.000.000.000

 

 

Default gateway address

000.000.000.000

 

 

Access control address

000.000.000.000

 

 

Access control mask

000.000.000.000

 

 

Frame Type (Netware)

Automatic selection

 

 

Valid protocol

All valid

 

 

14