Basic Printing

Printing without proof printing

Note

❒“Auto-Print after Master Making” in Auto On Line status is available to Win- dows 2000/XP only.

A Click “Auto-Print after Master Making” in [Printer features], and then select “On” in the [Change Setting for] box.

B Click [Apply], and then [OK].

3C Enter the number of prints required, and select the print range.

D Click [OK] to start printing.

When the machine receives data from the computer, it enters the online status and Data In indicator flashes.

Note

❒To stop the machine before Master Making, press [Job Reset] (When using Type B, press the {Job Reset} key). However, for a page where Master

Making has begun, Master Making cannot be cancelled even if [Job Reset] (When using Type B, press the {Job Reset} key) is pressed.

❒To stop the machine during printing, press the {Clear/Stop} key. If there is

incoming data from the computer to the machine, press [Job Reset] (When using Type B, press the {Job Reset} key) to clear it.

Printing after proof printing

Note

❒“Auto-Print after Master Making” in Auto On Line status is available to Win- dows 2000/XP only.

A Click “Auto-Print after Master Making” in [Printer features], and then select “Off” in the [Change Setting for] box.

B Click [Apply], and then [OK].

C Enter the number of prints required, and select the print range. D Click [OK] to start printing.

When the machine receives data from the computer, it enters the online status and Data In indicator flashes. The Proof Printing page is output.

Note

❒To stop the machine before Master Making, press [Job Reset] (When using Type B, press the {Job Reset} key).

❒If the {Proof} key is pressed, Proof Printing can be performed again.

32