Network Settings
| |
❖ Subnet mask | 1 |
Mask value for using one part of an IP Address as a network address. |
❖Default gateway address
Host or router address used as a gateway when negotiating with (printing, in- formation gathering) a workstation on a different network.
Note
❒Check with your network administrator for the address to be set.
❒If you do not know the address to be set, use the factory settings.
The access control address and the access control mask are used to limit a printable workstation, by using an IP address. If it is not necessary to limit printing, set “0.0.0.0”.
Note
❒If the access control address mask and the mask of the address of the work- station trying to print is the same, then access will be granted.
❒For example, if the access control address is set to 192.168.15.16, depending on the mask value, the address of the accessible workstation is as follows: (XXX can be any value).
Access control mask |
| Accessible Addresses | ||||
|
|
|
|
| ||
0. | 0. | 0. | 0 | XXX.XXX.XXX.XXX | ||
|
|
|
|
| ||
255. | 0. | 0. | 0 | 192.XXX.XXX.XXX | ||
|
|
|
| |||
255.255. | 0. | 0 | 192.168.XXX.XXX | |||
|
|
| ||||
255.255.255. | 0 | 192.168. 15.XXX | ||||
|
|
|
| |||
255.255.255.255 | 192.168. | 15. | 16 | |||
|
|
|
|
|
|
|
15