Manuals / Scag Power Equipment / Lawn and Garden / Lawn Mower

Scag Power Equipment GC-STT-CS manual Operate and test

Models: GC-STT-CS

1 28

Download 28 pages 41.51 Kb

Page 8

20. Operate and test.

18.Install the weight support bar to the front of the machine by resting it directly on top of the caster support arms and sliding it tight against the frame of the machine. Secure the weight bar to the machine using (2) bar clamps, (4) 3/8-16 x 1-1/2" bolts and (4) 3/8-16 elastic stop nuts. See Figure 3-6.

19.Install the weight assemblies to the weight support bar and secure them to the bar using the 1/2"x 6-1/4" pin and lanyard. See Figure 3-6

WEIGHT (5x)

LANYARD

ELASTIC STOP PIN

NUT

BAR CLAMP

BOLT

WEIGHT SUPPORT BAR

2002 GC-STT Install Art 3-5

FIGURE 3-6

20. Operate and test.

6

Image 8

Scag Power Equipment GC-STT-CS manual Operate and test

Contents

OPERATOR’S MANUAL MODEL GC-STT-CSREMEMBER - YOUR MOWER IS ONLY AS SAFE AS THE OPERATOR FAILURE TO FOLLOW SAFE OPERATING PRACTICESMAY RESULT IN SERIOUS INJURY 2.1 SAFETY AND OPERATING INSTRUCTIONS 1.1 INTRODUCTION1.2 DIRECTION REFERENCE 2.2 GRASS CATCHING OPERATION3. When dumping the hopper into a disposal area number reference when following the assembly instructions 3.1 ASSEMBLY INSTRUCTIONS FOR 52 CUTTER DECKSUse the illustrated parts list as a part RIGHT SIDE OF CUTTER DECK SHOWN VIEW FROM RIGHT SIDE OF CUTTER DECKBACK SIDE IDLER PULLEY BLOWER PULLEY FRONT SIDESPINDLE PULLEY20. Operate and test 4.1 ASSEMBLY INSTRUCTIONS FOR 61 CUTTER DECKS Use the illustrated parts list as a partnumber reference when following the assembly instructions RIGHT SIDE OF CUTTER DECK SHOWNRIGHT SIDE OF CUTTER DECK SHOWN PROPERLY SERVICE EGINE WITH OIL AND FUELBLOWER ASSEMBLY HAIR PIN MOUNTING POST PIN GC-STT install artBACK SIDE IDLER PULLEY BLOWER PULLEY FRONT SIDESPINDLE PULLEY18. Operate and test number reference when following the assembly instructions 5.1 ASSEMBLY INSTRUCTIONS FOR 72 CUTTER DECKSUse the illustrated parts list as a part BLOWER ASSEMBLY HAIR PIN MOUNTING POST PINELASTIC STOP NUTS AND LOCK GC-STT install artRIGHT SIDE OF CUTTER DECK SHOWN ELASTIC STOP NUTS LOCK WASHERS CATCH PLATE CARRIAGE BOLTS HEX HEADCatcher Support Bracket 19. Operate and test Description Hopper AssemblyFrame 6.1 GRASS CATCHER REMOVAL INSTRUCTIONS Page DANGER GC-STT BLOWER HOUSING ASSEMBLY1511 GC-STT BLOWER HOUSING ASSEMBLY Ref. Part No. Number DescriptionRef. Part No. Number Description 1 04067-07 Pin, Ring 2-1/4 Long 2 481547 Lanyard, Deck Height PinGC-STT BLOWER MOUNTING COMPONENTS UNDER SIDE OF CUTTER DECK SHOWNRIGHT SIDE OF CUTTER DECK SHOWN 390STT0203GC-STT BLOWER MOUNTING COMPONENTS PartNumber DescriptionCSHOPPEREXPLODE2-STT GC-STT-CS HOPPER COMPONENTS53 C GC-STT-CS HOPPER COMPONENTS PartNumber DescriptionGC-STT DECALS 481039 482275 482733LIMITED WARRANTY- COMMERCIAL ACCESSORY 2003 SCAG POWER EQUIPMENT PART NO. 03140 PRINTED PRINTED IN USA