Wave Key, All Mode, Backstop PFL | Euphonix 5B guide

System 5-B Digital Audio Mixing System Operation Manual	Channels and Strips

Backstop PFL

The System 5-B faders have a backstop switch past the bottom of their travel. Press Solo Ctrl on the Center Section to open the Solo Control Panel and select Backstop PFL to enable this feature. Then pull and hold a fader into the backstop to route the sig- nal’s PFL level to the Solo bus. Release the fader to cancel that fader’s routing to the Solo bus. Backstop PFL does not affect normal solo operations and can be used on group masters to PFL a Control Group. Deactivating Backstop PFL cancels the mode

8.2.5Wave Key

The Wave key has three functions:

•Press the Wave key to bring the Strip (both Swap and Main channels) to the center Strip (see Chapter 6: CM402 Center Section).

•Press the Wave key when selecting Strips and channels for Layouts, Strip Expand, Strip Lock, or other operations.

•Like a shift key, the Wave key modifies other keys. See 8.2.8 for example.

8.2.6All Mode

When All mode is active on a Strip, that Strip’s function and Swap keys operate on all Strips currently mapped to the console. This mode is for changing the display only. For example, when setting EQ on a Strip, the other displayed EQ filters on other Strips are not changed.

To activate All mode:

1.Hold down the Wave key and press the Clear key at the top of the Strip (above the top knob’s display).

All appears above Clear.

2.Press any function key (i.e., EQ, Dyn, etc.) on that Strip and all knobsets on the console display that function.

3.Press Swap to toggle all Strips between their Main and Swap levels.

4.Hold down the Wave key and press the Clear key again to disable All mode.

The All key on the CM401 now sets all strips to All Mode (see page 83).

99

Image 99

Euphonix 5B operation manual Wave Key, All Mode, Backstop PFL

Contents

Digital Audio Mixing System Page Important Safety Instructions Page Table of Contents Talkback Signal Patching Meters Meters Panel Master Section Meters Control Groups and Multi Format Masters 129 Page List of Figures Fader Controls Xiii Xiv List of Tables Page Manual Structure How to Use This Manual Introduction Microphone Inputs Overview of the System Components1 DF64 Digital Audio Frame Analog and Digital I/O GPI/O Midi I/F Channel Format Additional Hardware ComponentsControl Surface Channels and Strips System 5-B Startup Sequence USB Support Aux Bus ConfigurationMix Bus Terminology Mixer Model New Features in Version Patch the CD Player EMix SetupConnect and Play a CD Assign Channels to Console Quickstart to Common Task 2Device Outputs page in PatchNet Route to the Mix Bus Back to PatchNet Configure PatchNetConnect and Monitor a Microphone Assign a Channel to the Console 4Microphone assignment in Device Outputs Route to the Mix Bus Directory ProjectsBrowse Existing Project 1Projects Window Open or Create a Project Rename, Copy, Paste, or Delete a Project Titles 3New Title dialog Create a New Title Edit Notes Operations on Current TitleOpen an Existing Title Select Current Setting the Title Defaults Title Defaults Normalled Connections Meter Presets DSP PatchNet 8Console I/O a and B inputs Window Console I/O Device Inputs and Outputs CablingMic/Line Interface Patching Patch 12 mics into channels Patching Examples Select the Destinations 11Selecting destination channels Patch the multitrack returns into channels 13R-1 and mics patched Main Bus Send/Return Talkback Signal Patching Monitor PatchingSolo Bus and Utility Patching 15Main Bus Window with law palette Busses Law Palette Symbol Format Externals SystemMixer Model 19Folddown window Folddown 20Diagnostics Window Diagnostics Masters EventsSystem 5 Logo EMix Application CM401 Master Section Studio Monitoring 085 Monitor Source Selection Follow Control Room Monitors Sum or IntercancelMain Section and Aux Send Format Control Room Monitor Controls 4CR Output controls and Control Room Output Panel Dim and Cut 4 SLS/Cue Monitor Outputs Communications Monitors Talkback Aux Busses Listenback Oscillator/Slate OscillatorSlate 7CommsSlate/Osc Panel 8Quick Access Communication Panels Quick Access Communications Panels Solo Solo Mode Solo Speaker Selection Intercancel, Momentary, and SumSolo Level Solo Clear Backstop PFL Solo-Safe Meters Panel Meters Sto Clr Name Cnfg Peak Meter Configuration CM401 Master Section Master Section Meters CM401 Master Section CM402 Center Section CM402 Center Section 2Channel Select Panel Channel Select Panel Knobset Control Panel Knobset Panels Preset # Left Right Grp Section Bus Routing PanelGrp Route Main Route Auxiliary Sends Introduction to System 5-B BussesMain Busses Group Busses Bus Master Knobset Bus Master Functions All Key 1 Aux, Grp, and Main MastersBus Lock Mon Lock 2Main Bus Master left and Individual Bus right Displays Configuring Aux Busses Group and Aux BussesIndividual Main Busses Set Unity Toggle StereoToggle On/Off Toggle Pre/Post Copy Faders to Aux Copy Aux to AuxAux to Faders Bus Master Inserts Main and Group Bus Setup Strips Channels and Strips Swap Channel Meter and Status Display Individual Assignment Strip Controls Map Channels and Control Groups to Strips 3Channel Assign Panel Multiple Assignments Channel Assign Panel Shortcut Assignment for Multiple Channels Input Names or Channel Number Fader Meters Strip Utilities Strip Expand Strip Lock Knob and Fader Text Displays Spill SelectFader Unity Fader Meters Rotary Knobs Channel Control FeaturesChannel Name Function Keys Select/Punch Keys Touch-Sensitive Fader and Controls All Mode Wave KeyBackstop PFL Copy and Paste Talk Inputs Channel Processing Functions Digital Controls Analog Controls 9Stereo Controls Stereo Controls Dynamics Signal Processing In/Out 105 Compressor Expander/GateSidechain 11EQ and Filters knobsets Equalizers and Filters Parametric EQ Aux Sends FiltersAux Send Knobsets Aux Send Knobset Pan Knobsets 5 Pan 112 Pan Graph SmartPanTrack Panner Module Channel Process Order and Patch Points Trim & Phase Input Select Channel Processor Order Channel Patch Points 16Changing processor order Insert Point Channel Mixing Functions Group Bus RoutingRoute a Channel to a Group Bus Last Route a Channel to a Main Section Main Bus Routing Mix Minus 121 Talk Control Groups Control Groups Multi Format Masters 124 Name Control Group Create Control GroupAssign Control Group to Strip Modify Control Group Clear Control Group Multi Format Masters Spill Control Groups or Multi Format Masters Layouts and Snapshots Create a New Layout Layouts 131 Recall a Layout Modify a LayoutRename a Layout Snapshots Delete a LayoutCreate a New Snapshot Individual Channels Recall a Snapshot Update Snapshot Delete a Snapshot Rename a Snapshot GP132 GPI/O Event System Input Types Input Type Settings Activation Values Output Types Output Type Settings Activation Values Logical Operators Event Configuration Display Input Event List Deleting Events Output Move a Fader to Turn Off the Floor Monitors GPI Examples Channel # Activation level dB Activation Type Below Move a Fader to Turn On the Floor Monitors Move a Fader to Start a Cart Machine Move a Fader to Stop a Cart Machine Input # Active State Machine GP132 One Video Switcher Turns a Specific Camera and Channel On Input # Active State Off Machine GP132 One Video Switcher Turns a Specific Camera and Channel Off Audio Follow Video 3Audio Follow video configuration 150 151 152 Index 154 155 156