Euphonix 5B operation manual 151

System 5-B Digital Audio Mixing System Operation Manual GPI/O Event System

6.From the Output section, click <click to add output event>. The Add Output Event dialog opens.

Figure 11-6Add Output Event dialog

7.Select Switch Output from the Output Type dropdown menu.

8.Configure the lower area of the Output section to the following settings:

Figure 11-7Output Event Properties

This turns channel 1 on when camera 1 is selected by the video switcher.

9.Repeat Steps 6–7 to create additional output events to mute channels 2–4 but use the following settings instead of those depicted in Step 8:

Figure 11-8Output Event Properties

Figure 11-8shows Channel 2’s settings; each channel uses its own number but Switch Function = Channel and Active State = off for each.

So far, you have achieved the following functionality: when the video switcher selects camera 1, System 5-B’s channel 1 turns on and channels 2–4 mute. Repeat the steps above to program channel 2 to turn on when the video switcher selects camera 2 and mute channels 1, 3, and 4. Each tally input requires a discrete connection at the GP 132.

151