System | Busses and Bus Masters |
|
|
|
|
7.2.8Toggle Stereo
Pairs of Aux busses can be set to stereo or toggled back to mono from this panel.
1.Press the Stereo button.
2.Press an odd numbered Aux bus knob followed by an even numbered Aux bus knob to toggle both between mono and stereo.
3.When finished, toggle additional odd/even numbered pairs or select a different Aux function.
This effects all channels including those not on the surface.
7.2.9Toggle On/Off
Selected Aux busses can now be toggled on/off from this panel.
1.Press the On/Off button.
2.Press the desired Aux bus knob(s).
3.When finished, select a different Aux function. This effects only those channels on the surface.
7.2.10Toggle Pre/Post
Selected Aux sends can be toggled
1.Press the Pre/Post button.
2.Press the desired Aux bus knob(s).
3.When finished, select a different Aux function. This effects only those channels on the surface.
7.2.11Set Unity
Selected Aux busses can be set to unity from this panel.
1.Press the Unity button.
2.Press the Aux bus knob(s) to set to unity.
3.When finished, select a different Aux function. This effects only those channels on the surface.
86