System | Channels and Strips |
|
|
|
|
8.1.1Map Channels and Control Groups to Strips
Each Strip can control a Main and Swap channel. One or both of the channels can be a Control Group instead of a normal channel. Channels can be assigned individually us- ing the Strip controls or to multiple Strips using the Channel Assign Panel (page 92).
Individual Assignment: Strip Controls
The Chan Select key can be used to assign individual channels to a Strip on the console surface:
1.Access the Main or Swap level to assign the desired channel.
2.Press and hold down the Wave key and press the Chan Select key.
The channel list appears on the meter bridge screen at the top of the Strip. Control Groups that have been created also appear in the list. The Accept and Abort keys flash (see Figure
Chan
Select
Channel Select 
key
Swap
C 2 5
Abort Channel 
selection
Accept Channel 
selection
Wave key
Talk C 1
Solo
M S L
ON
R W H
T
| 12 | |
| 6 | |
Fader scrolls |
| 0 |
| ||
through list | 6 | |
| ||
12 
Figure 8-2 Strip controls during channel assignment
3.Use the fader to scroll through the list of channels and Control Groups on the screen; the highlighted entry is selected.
4.Press the Accept key to assign the selected channel or the Abort key to cancel. To assign the Swap channel, press the Swap key and begin with step 2.
91
