Spill | Euphonix 5B specification

System 5-B Digital Audio Mixing System Operation Manual	Control Groups and Multi Format Masters

2.Select the channels to include in the master channel by left-clicking and dragging across the desired channels.

The selected channels are now highlighted.

3.Right-click on any highlighted channel to select their channel format.

To group discontinuous channels into a multi-format master, right-click each channel and select the same format.

In PatchNet, the dynamics automatically link stereo, LCRS, 5.1, 6.1, or 7.1 channels.

Place the master on a channel strip like a normal channel:

1.Press the Masters key from the Main Panel.

2.Select a master channel and assign it to a Strip.

All Multi Format channels have a pan width control activated by the upper switch to the left of the PanF knob. Multi Format masters can be automated just like a mono channel.

9.3Spill

The Spill function temporarily assigns the slaves channels of a Control Group or Multi- Format Master to predefined Strips. See also Spill Select on page 96.

1.From the Main Panel, press the Strips key.

2.Press the Spill Select key in the Strips Panel so it lights.

3.Press the Wave key on each Strip to include in the Spill area.

4.Press the Chan Select key on a Group of Multi-Format master to spill its slaves into the selected Spill area.

5.To unspill the slave channels from the Spill area and restore the Strip’s previous channels, press any master or slave Chan Select key.

127

Image 127

Euphonix 5B operation manual Spill

Contents

Digital Audio Mixing System Page Important Safety Instructions Page Table of Contents Talkback Signal Patching Meters Meters Panel Master Section Meters Control Groups and Multi Format Masters 129 Page List of Figures Fader Controls Xiii Xiv List of Tables Page Manual Structure How to Use This Manual Introduction Microphone Inputs Overview of the System Components1 DF64 Digital Audio Frame Analog and Digital I/O GPI/O Midi I/F Channel Format Additional Hardware ComponentsControl Surface Channels and Strips System 5-B Startup Sequence USB Support Aux Bus ConfigurationMix Bus Terminology Mixer Model New Features in Version Patch the CD Player EMix SetupConnect and Play a CD Assign Channels to Console Quickstart to Common Task 2Device Outputs page in PatchNet Route to the Mix Bus Back to PatchNet Configure PatchNetConnect and Monitor a Microphone Assign a Channel to the Console 4Microphone assignment in Device Outputs Route to the Mix Bus Projects DirectoryBrowse Existing Project 1Projects Window Open or Create a Project Rename, Copy, Paste, or Delete a Project Titles 3New Title dialog Create a New Title Edit Notes Operations on Current TitleOpen an Existing Title Select Current Setting the Title Defaults Title Defaults Normalled Connections Meter Presets DSP PatchNet 8Console I/O a and B inputs Window Console I/O Cabling Device Inputs and OutputsMic/Line Interface Patching Patch 12 mics into channels Patching Examples Select the Destinations 11Selecting destination channels Patch the multitrack returns into channels 13R-1 and mics patched Main Bus Send/Return Monitor Patching Talkback Signal PatchingSolo Bus and Utility Patching 15Main Bus Window with law palette Busses Law Palette Symbol Format System ExternalsMixer Model 19Folddown window Folddown 20Diagnostics Window Diagnostics Events MastersSystem 5 Logo EMix Application CM401 Master Section Studio Monitoring 085 Monitor Source Selection Follow Control Room Monitors Sum or IntercancelMain Section and Aux Send Format Control Room Monitor Controls 4CR Output controls and Control Room Output Panel Dim and Cut 4 SLS/Cue Monitor Outputs Communications Monitors Talkback Aux Busses Listenback Oscillator Oscillator/SlateSlate 7CommsSlate/Osc Panel 8Quick Access Communication Panels Quick Access Communications Panels Solo Solo Mode Solo Speaker Selection Intercancel, Momentary, and SumSolo Level Solo Clear Backstop PFL Solo-Safe Meters Panel Meters Sto Clr Name Cnfg Peak Meter Configuration CM401 Master Section Master Section Meters CM401 Master Section CM402 Center Section CM402 Center Section 2Channel Select Panel Channel Select Panel Knobset Control Panel Knobset Panels Preset # Left Right Grp Section Bus Routing PanelGrp Route Main Route Auxiliary Sends Introduction to System 5-B BussesMain Busses Group Busses Bus Master Knobset Bus Master Functions All Key 1 Aux, Grp, and Main MastersBus Lock Mon Lock 2Main Bus Master left and Individual Bus right Displays Group and Aux Busses Configuring Aux BussesIndividual Main Busses Set Unity Toggle StereoToggle On/Off Toggle Pre/Post Copy Aux to Aux Copy Faders to AuxAux to Faders Bus Master Inserts Main and Group Bus Setup Strips Channels and Strips Swap Channel Meter and Status Display Individual Assignment Strip Controls Map Channels and Control Groups to Strips 3Channel Assign Panel Multiple Assignments Channel Assign Panel Shortcut Assignment for Multiple Channels Input Names or Channel Number Fader Meters Strip Utilities Strip Expand Strip Lock Knob and Fader Text Displays Spill SelectFader Unity Fader Meters Rotary Knobs Channel Control FeaturesChannel Name Function Keys Select/Punch Keys Touch-Sensitive Fader and Controls Wave Key All ModeBackstop PFL Copy and Paste Talk Inputs Channel Processing Functions Digital Controls Analog Controls 9Stereo Controls Stereo Controls Dynamics Signal Processing In/Out 105 Expander/Gate CompressorSidechain 11EQ and Filters knobsets Equalizers and Filters Parametric EQ Filters Aux SendsAux Send Knobsets Aux Send Knobset Pan Knobsets 5 Pan 112 SmartPan Pan GraphTrack Panner Module Channel Process Order and Patch Points Trim & Phase Input Select Channel Processor Order Channel Patch Points 16Changing processor order Insert Point Group Bus Routing Channel Mixing FunctionsRoute a Channel to a Group Bus Last Route a Channel to a Main Section Main Bus Routing Mix Minus 121 Talk Control Groups Control Groups Multi Format Masters 124 Name Control Group Create Control GroupAssign Control Group to Strip Modify Control Group Clear Control Group Multi Format Masters Spill Control Groups or Multi Format Masters Layouts and Snapshots Create a New Layout Layouts 131 Modify a Layout Recall a LayoutRename a Layout Delete a Layout SnapshotsCreate a New Snapshot Individual Channels Recall a Snapshot Update Snapshot Delete a Snapshot Rename a Snapshot GP132 GPI/O Event System Input Types Input Type Settings Activation Values Output Types Output Type Settings Activation Values Logical Operators Event Configuration Display Input Event List Deleting Events Output Move a Fader to Turn Off the Floor Monitors GPI Examples Channel # Activation level dB Activation Type Below Move a Fader to Turn On the Floor Monitors Move a Fader to Start a Cart Machine Move a Fader to Stop a Cart Machine Input # Active State Machine GP132 One Video Switcher Turns a Specific Camera and Channel On Input # Active State Off Machine GP132 One Video Switcher Turns a Specific Camera and Channel Off Audio Follow Video 3Audio Follow video configuration 150 151 152 Index 154 155 156