
System | eMix Application |
|
|
|
|
4.1.4Title Defaults
This section describes how to set up basic PatchNet settings. This process includes naming the device inputs and outputs and connecting group bus outputs to multitrack inputs. The setup process is equivalent to setting and labeling the normalled connec- tions on a conventional patch.
NOTE: To clarify the use of the terms Inputs and Outputs in PatchNet, Device per- tains to equipment other than the System
The following settings are stored to the Title Defaults and are automatically included with each new Title:
•PatchNet settings and names
•Bus Setup: names and formats
•Externals Setup: names and formats
•SnapShots
•Layouts
•Meter setups
Setting the Title Defaults
The Title Defaults can be set by clicking the Set Title Defaults button on the Titles page in PatchNet. This copies all settings listed above from the currently open Title into the Title Defaults for the current Mixer Model. The warning in Figure
Figure 4-5 Updating Title Defaults warning
36