Section 5
TROUBLESHOOTING CUTTING CONDITIONS (CONT'D)
R
Condition | Cause | Cure |
U n e v e n C u t o n F l at | Lift worn from blade | Replace blade |
Ground - Wavy |
|
|
Appearance, Scalloped | Blade upside down | Mount with cutting edge toward ground |
Cut, or Rough Contour |
|
|
| Deck plugged, grass accumulation | Clean underside of deck |
| Too much blade angle (deck pitch) | Adjust pitch and level |
| Deck mounted improperly | See your authorized SCAG dealer |
| Bent spindle area | See your authorized SCAG dealer |
Width of Deck |
|
|
SGB020 | Dull blade | Sharpen blade |
Uneven Cut on Uneven
| May need to reduce ground speed, raise |
Uneven ground | cutting height, and/or change direction |
| of cut |
Width of Deck |
|
|
SGB021 |
|
|
Sloping Ridge Across | Tire pressures not equal | Check and adjust tire pressure |
Width of Cutting Path |
|
|
| Wheels uneven | Check and adjust tire pressure |
| Deck mounted incorrectly | See your authorized SCAG dealer |
Deck not level | Check for level and correct |
Width of Deck
SGB023
17
