Section 2 | R |
WARNING
DO NOT use your hand to dislodge the clogged discharge chute. Use a stick or other device to remove clogged material after the engine has stopped running and the blades have stopped turning.
DANGER
DO NOT run the engine inside a building or a confined area without proper ventilation. Exhaust fumes are hazardous and contain carbon monoxide which can cause brain injury and death.
8.Be alert for holes, rocks, roots and other hidden hazards in the terrain. Keep away from any drop offs. Beware of overhead obstructions (low limbs, etc.), underground obstacles (sprinklers, pipes, tree roots, etc.). Cautiously enter a new area. Be alert for hidden hazards.
9.Disengage power to cutter deck before backing up. Do not mow in reverse unless absolutely necessary and then only after observation of the entire area behind the mower. If you must mow in reverse, maintain a constant lookout to the rear of the machine and mow slowly.
10.DO NOT turn sharply. Use care when backing up.
11.Disengage power to cutter deck before crossing roads, walks or gravel drives.
12.Mow only in daylight or good artificial light.
13.NEVER raise the deck with the blades engaged.
14.Take all possible precautions when leaving the machine unattended, such as disengaging the mower, stopping the engine, and removing the key.
15.Disengage power to the attachments when transporting or when not in use.
16.The machine and attachments should be stopped and inspected for damage after striking a foreign object, and damage should be repaired before restarting and operating the machine.
Caution
Do not touch the engine or the muffler while the engine is running or immediately after stopping. These areas may be hot enough to cause a burn.
17.Keep hands and feet away from cutter blades and moving parts. Contact can injure.
18.Transport the mower using a heavy duty trailer or truck. Insure the trailer or truck has all of the necessary lighting and markings as required by laws, codes, and ordinances. Secure a trailer with a safety chain.
19.Be cautious when loading and unloading onto trailers or trucks. Use only a full width ramp. Always back on and drive off a trailer.
20.When transporting the mower, make sure the neutral lock lever is in neutral lock, the engine is off with the key removed, the parking brake is engaged and the wheels have been blocked.
21.Tie the mower down securely using the tie down points located on the front and rear of the machine. See Figure
TIE DOWN | TIE DOWN | |
POINT | ||
POINT | ||
|
Figure 2-1. Front Tie Down Points
5
