Scag Power Equipment SVR52V-26FX manual Specifications, Electrical, Engine Deck, Cutter Deck

R

Section 3

	SPECIFICATIONS
3.1 ENGINE
General Type	Heavy Duty Industrial/Commercial Gasoline
Brand	Kawasaki
Horsepower:
(Scag Model SVR36A-20FX)	20 HP (Spec. # FX600V-AS09-R)
(Scag Model SVR48V-24FX)	24 HP (Spec.# FX691V-AS11-R)
(Scag Model SVR52V-26FX)	26 HP (Spec.# FX730V-AS06-R)
Cylinders	2 with Cast-Iron Sleeves
Governor	Mechanical Type with Variable Speed Control Set At 3600 RPM (+/- 100 RPM)
Idle Speed:
Kawasaki	1550 RPM (+/- 150 RPM)
Fuel	Non-Leaded Gasoline with a Minimum Octane Rating of 87
Oil Pump	varies - see engine manufacturer's specifications
Starter:
Kawasaki	Electric Starting with solenoid shift starter
3.2 Electrical
Starter	12-Volt Electric Ring Gear Type, Key and Solenoid Operated Interlock
Interlock Switches	Operator Presence, Mower Engagement (BBC), Neutral Lever
Instrument Panel	Key Switch, Throttle Lever, Choke Lever, PTO Switch, Hour Meter and Neutral Lever
3.3 ENGINE DECK
Drive System	Hydraulic Drive with Two Variable Displacement Pumps
	and Two Cast-Iron High Torque Wheel Motors
Hydraulic Pumps	Two Hydro-Gear model PG Series 10 cc. Hydraulic Pumps
	with Dump Valves for movement without the engine running
Hydraulic Drive Motors	Two Hydro-Gear Model HGM 12P Cast-Iron Wheel Motors
Steering/Travel Control	Twin Lever Steering Control with Individual Control to Each Wheel
Parking Brake	Lever Actuated Linkage to Brakes on Both Drive Wheels
Wheels:
(2) Front Caster	11 X 4-5 Flat-Free w/Roller Bearings
(2) Drive -	18 x 7.0-8 (36"), 20 x 10.5-8 (48" &52") Four-Ply Pneumatic Tubeless, Radius Edge
Tire Pressure:
Front Caster	Flat-Free
Drive	12 PSI
Fuel Tank	5-1/2 Gallon Seamless Polyethylene Tank with Large Opening,
	Fuel Cap, Fuel Gauge and Integrated Cup Holder
Travel Speed:
Forward	0 up to 8.5 MPH
Reverse	0 up to 6.0 MPH

-NOTE- The machine will travel at 8.5 mph for transport purposes. For best cutting performance the forward travel speed should be adjusted depending upon the cutting conditions.

3.4 Cutter Deck

Type	Out-Front design with anti-scalp rollers
Construction	36 / 48 = 7-Gauge Deck Top, 7-gauge (3/16") Deck Skirt
	52 = 10-Gauge Deck Top, 7-Gauge (3/16") Deck Skirt

8