Mupgrade Utility
For Network Management Cards
User Manual
8 Remote Configuration
The Remote configuration function allows you to import, modify and export configuration (settings) from and to Network Management Cards.
Four steps to configure all your Network Management Cards:
1.Configure a Network Management Card located on the network through the html interface to create a master configuration. Refer to the Network Management Card user manual for details.
2.Import this configuration from the master card.
3.Edit and change some parameters and select the fields whose must be overwritten in the destination cards and save the new configuration in a file.
4.Export the new configuration to other cards which have same firmware release than the master card
This feature is available starting card firmware release FB:
There is no compatibility limitation depending on the UPS model used or on the Network Management Card model. A configuration file is compatible with all the other cards which have the same firmware revision.
Mupgrade - User Manual | 34003662EN/CA | Page 12/18 |
