Schneider Electric EM400, EM4800

PowerLogicTM Series EM4000/EM4800 930-112-01-D.00

11/2013

Normal Mode

In Normal mode, the Display button scrolls through the information for each meter.

The left  and right  arrow buttons select the previous or next meter points

respectively. The following information is available:

• Real Energy Delivered kWh D

• Real Energy Received kWh R

• Real Power Watts

• Reactive Energy Delivered kVarhD

• Reactive Energy Received kVarhR

• Reactive Power Var

• Peak Demand PeakW (Watts)

In Normal mode, the right and left arrow buttons scroll the display from meter points

1 to 8, 1 to 12, or 1 to 24, depending on your configuration.

Diagnostics Mode

Diagnostics mode is accessed by pressing and holding the Display button for 5

seconds. In Diagnostics mode, pressing the Display button will scroll through the

following information in addition to the Normal mode data:

• Send data command

• CT Primary value and Real Power (Watts) per phase

• Current (Amps) per phase

• Power Factor (pf) per phase

• Phase angle (Degrees) per phase

• Voltage per phase

• Local IP address

• Reset factory default IP address command

•Verify

• Badge #

• Date and time (UTC)

In Diagnostics mode, the right and left arrow buttons scroll the display from meter 1

through N. When the local IP address is shown on the LCD, use the right and left

arrow buttons to scroll through the following information:

• Remote host server IP address

• Time server IP address

• Default IP address

• Default NetMask

• Default gateway

• PPP user name

• Phone number

• AT command string

• Alternate phone number

• Unit serial number

• Firmware build number