Schneider Electric EM400, EM4800

PowerLogicTM Series EM4000/EM4800 930-112-01-D.00

11/2013

Figure 3: Configuration tool main window

Connecting to a Meter

The configuration tool automatically detects and lists the PowerLogic meters on the

same network segment as the PC. The configuration tool can also be used with

meters on a different network.

Contents

Main Page Safety Information Important Information Please note Notices FCC Part 15 Notice FCC Part 68 Notice Network Compatibility Notice for the Internal Modem Page Table of Contents Page PowerLogic configuration tool System Set-up and Description Configuration and Programming "SW1" 930-112-01-D.00 PowerLogicTM Series EM4000/EM4800 11/2013 Parameter Read access Write access Activation time 2013 Schneider Electric All Rights Reserved 3 Display Navigation Page Communications Connections Page Configuring the Meters Login Page Page Unit Field Configuration Tab 930-112-01-D.00 PowerLogicTM Series EM4000/EM4800 11/2013 2013 Schneider Electric All Rights Reserved 11 Table 2: Unit Field Configuration tab parameters Field Parameter Description Report Parameters The Report section in the main configuration window has six tabs: Figure 7: Intervals tab in the Report section Page Table 4: Types tab configuration parameters Page Figure 10: Calculations & Format tab in the Report section Table 6: Calculations & Format tab configuration parameters Figure 11: BACnet tab in the Report section Table 7: BACnet tab configuration parameters Page Manufacturing Tab Page Meter Points (Circuits) Tab Page Page Pulse Probes Tab Page Completing the Meter Configuration