Schneider Electric EM400, EM4800

930-112-01-D.00 PowerLogicTM Series EM4000/EM4800

11/2013

Figure 15: Badge Numbering pane

Reset Buttons

•Reset Dial Readings button - selecting this button resets all registers for all

energy types and pulse counts to zero. This function takes effect immediately

and does not require a send action.

•Send PC Time button - selecting this button configures the meter with the

current PC UTC and local time. This function takes effect immediately and does

not require a send action. This function can be used when access to the network

time service is not available.

Contents

Main Page Safety Information Important Information Please note Notices FCC Part 15 Notice FCC Part 68 Notice Network Compatibility Notice for the Internal Modem Page Table of Contents Page PowerLogic configuration tool System Set-up and Description Configuration and Programming "SW1" 930-112-01-D.00 PowerLogicTM Series EM4000/EM4800 11/2013 Parameter Read access Write access Activation time 2013 Schneider Electric All Rights Reserved 3 Display Navigation Page Communications Connections Page Configuring the Meters Login Page Page Unit Field Configuration Tab 930-112-01-D.00 PowerLogicTM Series EM4000/EM4800 11/2013 2013 Schneider Electric All Rights Reserved 11 Table 2: Unit Field Configuration tab parameters Field Parameter Description Report Parameters The Report section in the main configuration window has six tabs: Figure 7: Intervals tab in the Report section Page Table 4: Types tab configuration parameters Page Figure 10: Calculations & Format tab in the Report section Table 6: Calculations & Format tab configuration parameters Figure 11: BACnet tab in the Report section Table 7: BACnet tab configuration parameters Page Manufacturing Tab Page Meter Points (Circuits) Tab Page Page Pulse Probes Tab Page Completing the Meter Configuration