Schneider Electric EM400, EM4800

PowerLogicTM Series EM4000/EM4800

Multi-Circuit Meters

Schneider Electric

35 rue Joseph Monier

92500 Rueil-Malmaison, France

www.schneider-electric.com

930-112-01-D.00 11/2013

PowerLogic is a trademark or registered trademark of Schneider Electric in France, the USA and

other countries. Other trademarks used are the property of their respective owners.

This product must be installed, connected and used in compliance with prevailing standards

and/or installation regulations. As standards, specifications and designs change from time to time,

always ask for confirmation of the information given in this publication.

Contents

Main Page Safety Information Important Information Please note Notices FCC Part 15 Notice FCC Part 68 Notice Network Compatibility Notice for the Internal Modem Page Table of Contents Page PowerLogic configuration tool System Set-up and Description Configuration and Programming "SW1" 930-112-01-D.00 PowerLogicTM Series EM4000/EM4800 11/2013 Parameter Read access Write access Activation time 2013 Schneider Electric All Rights Reserved 3 Display Navigation Page Communications Connections Page Configuring the Meters Login Page Page Unit Field Configuration Tab 930-112-01-D.00 PowerLogicTM Series EM4000/EM4800 11/2013 2013 Schneider Electric All Rights Reserved 11 Table 2: Unit Field Configuration tab parameters Field Parameter Description Report Parameters The Report section in the main configuration window has six tabs: Figure 7: Intervals tab in the Report section Page Table 4: Types tab configuration parameters Page Figure 10: Calculations & Format tab in the Report section Table 6: Calculations & Format tab configuration parameters Figure 11: BACnet tab in the Report section Table 7: BACnet tab configuration parameters Page Manufacturing Tab Page Meter Points (Circuits) Tab Page Page Pulse Probes Tab Page Completing the Meter Configuration