Schneider Electric EM400, EM4800 Table 4: Types tab configuration parameters

PowerLogicTM Series EM4000/EM4800 930-112-01-D.00

11/2013

NOTE: If parameters are grayed out, they are not available on the variant or firmware revision of the meter being configured.

Parameter Description

Watt Hours Delivered Interval/Register These types of records can be enabled by

selecting () the check box.

Watt Hours Received Interval/Register

VAR Hours Delivered Interval/Register

VAR Hours Received Interval/Register

VA Hours Interval/Register

Present Demand

Peak Demand

Peak Current

Voltage

Pulses

Contents

Main Page Safety Information Important Information Please note Notices FCC Part 15 Notice FCC Part 68 Notice Network Compatibility Notice for the Internal Modem Page Table of Contents Page PowerLogic configuration tool System Set-up and Description Configuration and Programming "SW1" 930-112-01-D.00 PowerLogicTM Series EM4000/EM4800 11/2013 Parameter Read access Write access Activation time 2013 Schneider Electric All Rights Reserved 3 Display Navigation Page Communications Connections Page Configuring the Meters Login Page Page Unit Field Configuration Tab 930-112-01-D.00 PowerLogicTM Series EM4000/EM4800 11/2013 2013 Schneider Electric All Rights Reserved 11 Table 2: Unit Field Configuration tab parameters Field Parameter Description Report Parameters The Report section in the main configuration window has six tabs: Figure 7: Intervals tab in the Report section Page Table 4: Types tab configuration parameters Page Figure 10: Calculations & Format tab in the Report section Table 6: Calculations & Format tab configuration parameters Figure 11: BACnet tab in the Report section Table 7: BACnet tab configuration parameters Page Manufacturing Tab Page Meter Points (Circuits) Tab Page Page Pulse Probes Tab Page Completing the Meter Configuration