![](/images/new-backgrounds/1131749/13174935x1.webp)
PowerLogicTM Series EM4000/EM4800 | |
| 11/2013 |
|
|
2.Enter the IP address of the meter to be configured, then click Connect. The configuration tool main window appears populated with the current programming information for the selected meter. See Figure 6.
3.Proceed to “Unit Field Configuration Tab” on page 10.
Figure 6: Main configuration window with configured parameters
Unit Field Configuration Tab
Use Table 2 to set meter configuration parameters in the Unit Field Configuration tab.
10 | ©2013 Schneider Electric All Rights Reserved |