Manuals / Schumacher / Power Tools / Battery Charger

Schumacher SI263 manual Positive-Grounded System, Negative-Grounded System Standard

Models: SI263

1 32

Download 32 pages 19.34 Kb

Page 17

6. Clean and store the Battery Manager in a dry location.

Negative-Grounded System (Standard)

6. Clean and store the Battery Manager in a dry location.

Positive-Grounded System

1.To connect to a positive-grounded system, attach the black NEGATIVE output clamp to the NEGATIVE post of the battery. Twist the clamp back and forth to ensure a solid electrical connection is made.

2.Connect the red POSITIVE output clamp to a heavy, unpaint- ed metal part of the chassis or engine block, away from the battery. DO NOT connect to the positive battery post, carbu- retor, and fuel line or sheet metal part.

POSITIVENEGATIVE

BATTERY CHARGER

BATTERY

24", 6 GAUGE CABLE

POWER CORD

TO

GROUNDED

POWER

OUTLET

17

SI263 IM 0205v1.indd 17

3/2/05 4:41:08 PM

Image 17

Schumacher SI263 manual Positive-Grounded System, Negative-Grounded System Standard

Contents

SI263 Instructions Intelligent Battery ManagerRead and save these instructions SI263 IM 0205v1.inddDear Sharper Image Customer Call 1-800-344-4444 for 24-7 ordering and customer serviceRichard Thalheimer Founder, Chairman and Chief Executive Ofﬁcer or go to , our complete online storePersonal Safety Precautions Table of ContentsWarnings SI263 IM 0205v1.inddMaintenance and Care Table of ContentsTroubleshooting Statement of FCC ComplianceWARNING - RISK OF EXPLOSIVE GASES Important Safety PrecautionsWarnings Warnings Do not expose the Battery Manager to rain or snowWarnings Never operate the Battery Manager if it has received a hard blow, been dropped or otherwise damaged. Take it to a quali- ﬁed service professional for inspection and repairPersonal Safety Precautions Personal Safety Precautions PowerCharging Preparation Features Extension Cord Minimum Recommended Extension Cord UseBattery Preparation Battery Preparation Charging Battery in the VehicleOperation 3. To determine the polarity of the battery posts, check the iden- tiﬁcation marks on the battery POSITIVE POS, P or + and NEGATIVE NEG, N or -. The positive post is usually marked red and is larger than the negative post Charging Battery in the VehicleNegative-Grounded System Standard Negative-Grounded System Standard Positive-Grounded System6. Clean and store the Battery Manager in a dry location Charging a Removed Battery 8. Clean and store the Battery Manager in a dry location Charging a Removed BatteryCharge Rate Operating FeaturesBattery Type Button Maintain Mode When the CHARGED green LED is illumi- nated, the Battery Manager switches automatically to Maintain Mode. The Battery Manager monitors battery voltage. When the voltage drops to a predetermined level, the Battery Manager will re-initiate a charge cycle at the 2A rate General NotesBattery Type Button Charging Tips Maintenence and Care PROBLEM TroubleshootingSOLUTION POSSIBLE CAUSEPROBLEM TroubleshootingSOLUTION POSSIBLE CAUSEPROBLEM TroubleshootingPOSSIBLE CAUSE SOLUTION This happens if theNo problem. This is TroubleshootingPROBLEM PROBLEM TroubleshootingSOLUTION POSSIBLE CAUSEStatement of FCC Compliance Reorient or relocate the receiving antenna FCC Label Compliance StatementStatement of FCC Compliance What Is Covered WARRANTYWhat Is Not Covered How to Obtain Service