Charging a Removed Battery
6.To select the desired charge rate and battery voltage, press the appropriate CONTROL BUTTONS. The CHARGING (yellow) LED illuminates when the charging process begins. If the CHECK (red) LED illuminates, check for correct cable connections.
7.To disconnect the Battery Manager, unplug its power cord before attempting to disconnect the Battery Manager clamps. While standing away from the battery, remove the output clamp from the NEGATIVE battery post. Finally, remove the output clamp from the POSITIVE battery post.
8.Clean and store the Battery Manager in a dry location.
19
SI263 IM 0205v1.indd 19
3/2/05 4:41:08 PM
