All Search
If your device does not respond after trying all of the codes for your brand, try the All Search procedure.
During All Search, the AllTouch Remote Control searches through a library of codes until it finds the right one for your device. The AllTouch Remote Control then completes the setup automatically.
Follow the steps below to do an All Search.
1.Turn on the device that you could not set up using the codes. For example, if all the codes for your brand of VCR did not respond, turn off your VCR. If the device is a CD Player, turn it on and insert a disc.
2.Press and release the appropriate button on the remote control.
Device | Button |
VCR
Auxiliary (such as a CD player)
TV
HCT/Home Terminal
VCR
AUX
TV
CBL
3. Press and hold
4. Press 9 9 1 . The red light blinks twice.
5. Point your AllTouch Remote Control directly at the device.
T6058
6. Press POWER (or PLAY for CD player) then the appropriate button
( VCR , AUX , TV , or CBL ). Repeat this step until your device turns on or starts to play. You may have to repeat this 50 or 60 times.
Important! Be patient and go slowly. Allow enough time for the device to turn on or for the CD player to start.
10 | 573497 Rev B |
